L2 Energy Consulting: 2013

Thursday 13 June 2013

Wednesday 12 June 2013

SBEM on new Maths Block completed

L2 Energy have recently completed SBEM Calculations on a new Maths Block for a Secondary School in Hampshire. Heated by the ever popular Air Source Heat Pump into a wet underfloor system with mechanical ventilation provided to teaching space, this new build is set to start on site by the end of June 2013.

SBEM Calculations & EPC Completed on Hampshire Convent.

L2 Energy have completed the SBEM Calculations and Energy Performance Certificate on Abbey House, Romsey. The building provides new accommodation for the Daughters of Wisdom. Heating is provided by an underfloor wet system via the use of an Air Source Heat Pump and utilizing latest energy efficient lighting technology which will provide energy efficient living for the sisters for many years to come.

Thursday 25 April 2013

SBEM Calculations on London development completed

L2 Energy Consulting complete SBEM Calculations for commercial areas of a new development in London. With an obligation to achieve a 25% improvement on current Building Regulations Part L: Conservation of Fuel and Power via the Energy Hierarchy policy, L2 Energy Consulting were able to advise a solution to achieve this without the use of renewable energy. This will be a thing of the past following the introduction of Part L 2013 set to come into force from 1st October.

Tuesday 5 March 2013

BB101 - Building Bulleting 101

L2 Energy complete BB101 Overheating calculations on new school classroom block in Hampshire.

BB101 - Building Bulletin 101 provides strict performance standards for classroom and learning spaces to comply with concerning summertime overheating and ventilation during occupied periods in educational establishments.

For further information visit http://www.l2energy.co.uk/bb101.html

Friday 4 January 2013

SBEM Calculations complete on proposed new development in Fareham

L2 Energy start 2013 the way they mean to go on throughout the whole year with the completion of SBEM Calculations on the a proposed new Co-op store in Fareham. At design stage the new scheme is sailing through Building Regulation Compliance under Part L2A with the CO2 emissions expected to be in the order of 15% lower than the Target Emission Rate set by the 2010 Regulations.

Energy Statements for Planning

Energy statements for planning are becoming much more of a requirement when filing a planning application for a suggested new development to a Local Authority for approval. Each individual Local Authority will have their own twist on what is required before the application will granted and the development can begin.

So what is an Energy Statement?

An Energy Statement is a document which demonstrates to the planning authorities that a proposed development is conscious of the environmental impact, in terms of carbon dioxide emissions, that the new building or buildings will produce and the proposed measures which are to be taken to decrease co2 emissions from new development.

Many authorities will put their own stamp on what their requirements are. This will almost certainly include the use of on-site renewable energy sources and from which between 10-20% of carbon dioxide emissions will have to be lowered by their use; the percentage requirement will come down to individual authorities. The Energy Statement should talk about the types of Renewable Energy options available and their appropriateness for inclusion within the new development and thereafter an assessment of the carbon savings anticipated via the chosen technology or technologies to be included.

Reducing Carbon emissions is not all about the inclusion of renewable technologies though and many local authorities recognise this and require a more rounded approach to be taken. This is often demonstrated by the use of a so called ‘Energy Hierarchy’ approach.

Stage 1 of the ‘Energy Hierarchy’ is Improvements to building fabric; this looks to go beyond UK Building Regulations for thermal efficiency of fabric or U-values as they are technical known. The minimum U-value of an External Wall in the UK under 2010 Regulations for commercial property is 0.35 W/m².K, for Ground Floors and Roofs the minimum standard is 0.25 W/m².K and for Windows and Doors the minimum standard is 2.2 W/m².K. With more advanced building products coming to the market place every month these minimum standards can be greatly improved upon and it is not uncommon for an External Wall U-value to be as low as 0.18 or better, Floor and Roof down to 0.14 and Windows and Doors down to 0.9 W/m².K, the lower the U-value the more thermally efficient the element is. Improvements to Air Permeability can also play a part in the equation, Building Regulations require a minimum Air Permeability of 10 m³/hr.m² for a new commercial building greater than 500m², with buildings being capable of achieving air tightness of below 3 m³/hr.m² when built to high standards, this can reap considerable rewards. In summary by improving the thermal efficiency and air tightness of a building, huge reductions in carbon emissions can made.

Stage 2 of the ‘Energy Hierarchy’ considers the efficiency of the Mechanical and Electrical (M&E) Installations that are to go into the property, by maximising the plant efficiency such as boilers, air conditioning, hot water storage, mechanical ventilation and lighting, obviously this will have a huge impact on carbon emissions of any proposed building, whilst minimum standards have to be met to achieve Building Regulation compliance stage 2 of the ‘Energy Hierarchy’ seeks to go well beyond minimum standards to further reduce co2 emissions.

And finally Stage 3 of the ‘Energy Hierarchy’ Renewable Energy, following improvements to the fabric thermal efficiency and then to the efficiency of the M&E installations the planning authority will seek further reductions in co2 emissions through the use of renewable energy sources. Renewable Energy Sources investigated for their feasibility into a scheme usually include Photovoltaic’s (solar panels), Solar Thermal (solar hot water installations), ground source heat pumps, wind turbines and Combined Heat & Power (CHP) installations. Each of these may have their place in a scheme but may also be ruled out due to site constraints such as overshadowing from adjacent buildings or trees, limited clear wind path again due to adjacent buildings or trees, or feasibility may be discarded due to good old fashion cost restraints.

Whatever the requirements are of the individual UK Planning Authorities; L2 Energy Consulting will have come across them before and will have the necessary expertise to provide the calculations and advise required to satisfy their needs to a successful outcome. For further information regarding our service in this area please visitwww.l2energy.co.uk/energy-statements.html We will be happy to share our expertise with you.